1 - 28 of 46 Listings
Rent
All
Condition: Used
Stock Number: 3702932
Description: PF 12,20 M/ 40" SCHNEIDWERK
(0010) T786 Fendt Schneidwerk
(0020) Z422 Schneidwerk 40´ PF (12,20m) SuperFlow
(0030) Z731 Ährenheber PF 40´ (12,20...
Updated: Friday, July 31, 2026 10:15 AM
Location: Meppen, Lower Saxony, Germany
Seller: ATC - AGRAVIS Technik Center GmbH
Cutting Width: 9.14 m
Serial Number: AGCM92200BHS01142
Condition: Used
Description: NICE MASSEY FERGUSON 9220 SWATHER - 30' AGCO 5200 DRAPER HEADER - ONLY 903 TOTAL HOURS - CUMMINS ENGINE - SWATH ROLLER INCLUDED - VERY CLEAN AND WE...
Updated: Saturday, August 15, 2026 03:04 PM
Location: Langdon, North Dakota, USA
Seller: Moore Auctions LLC
Cutting Width: 7.32 m
Cutterbar Type: Rigid
Serial Number: AGCM53250FHDW2157
Condition: Used
Stock Number: 16071
Fore/Aft Reel: Yes
Description: Selling a Draper Header.
24' Width.
Setup for a Swather.
Both Draper Belts can move both directions.
Dual Knife Drive.
Hydraulic fore/aft and ...
Updated: Thursday, August 06, 2026 07:05 AM
Location: Holbrook, Nebraska, USA
Seller: Midwest Equipment Auctions
Serial Number: AGCCFDH00EHD01215
Condition: Used
Description: Agco 9250 Dyna Flex
30' Draper Head
Owner says there is a small tear in one of the draper belts (not shown in photos)
Header trailer does not s...
Updated: Thursday, August 06, 2026 07:05 AM
Location: Tekamah, Nebraska, USA
Seller: Riverside Auction & Sales, LLC
Number of Rows: 8
Row Spacing: 76.2 cm
Serial Number: 083016095
Condition: Used
Description: 1994 Agco 830 Corn Head, 8 Row, 30" Spacing, Calmer BT Chopper Upgrade Kit, Upgrade All Wear Parts have been Replaced and have less than 1,000 Acre...
Updated: Thursday, August 13, 2026 07:24 AM
Location: Stratford, Iowa, USA
Seller: AgriPlains Auctions
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 083025372
Condition: Used
Stock Number: W56372
Description: 830 AGCO CORN HEAD
HEAD IS IN GOOD WORKING CONDITION
Updated: Thursday, August 13, 2026 07:24 AM
Location: Pomeroy, Iowa, USA
Seller: Western Iowa Equipment
Number of Rows: 8
Row Spacing: 76.2 cm
Serial Number: 083017313
Condition: Used
Description: Agco 830 corn head with poly snouts. This head comes with a Montgomery Ward 546 head carrier.
Updated: Monday, August 17, 2026 09:50 PM
Location: Greenville, Illinois, USA
Seller: Mollett Auction Service LLC
Cutting Width: 4.57 m
Serial Number: HS05490
Condition: Used
Description: Good working header
All new conditioner bearings
Updated: Monday, August 17, 2026 04:11 PM
Location: Hobson, Montana, USA
Seller: TJ Equipment LLC
Cutting Width: 10.97 m
Serial Number: H410535
Condition: Used
Stock Number: 032
Description: 2009 Agco W36 Straight Cut Header measuring 36 feet with good condition roto shears, gauge wheels and pickup reels. Same header as a MF- 5200.
...
Updated: Monday, August 17, 2026 02:11 PM
Location: Waskatenau, Alberta, Canada
Seller: Hammerstrap Industries Inc.
Cutting Width: 9.14 m
Cutterbar Type: Rigid
Serial Number: 3042660G
Condition: Used
Stock Number: 5090
Gathering Type: Auger
Description:
Updated: Monday, August 10, 2026 02:16 PM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Cutting Width: 6.1 m
Serial Number: 2044186F
Condition: Used
Description: 20' flex head,
1 1/2" sickle,
pipe reel,
plastic teeth,
Good Poly bottom.
Updated: Friday, July 24, 2026 09:51 AM
Location: Pound, Wisconsin, USA
Seller: Dan Bieber Equipment
Cutting Width: 6.1 m
Serial Number: 2040337F
Condition: Used
Description: 20' flex head,
3 " sickle,
fore/aft,
Godd poly bottom.
Updated: Friday, July 24, 2026 09:51 AM
Location: Pound, Wisconsin, USA
Seller: Dan Bieber Equipment
Cutting Width: 6.1 m
Serial Number: 2042860F
Condition: Used
Stock Number: H35102
Description: Used AgCo 500 flex grain head, 20' wide, single auger
drive, good fingers, off of a Gleaner R.
Updated: Thursday, July 30, 2026 05:16 PM
Location: Wausau, Wisconsin
Seller: Swiderski Equip, Inc. - Wausau
Cutting Width: 9.14 m
Air Reel: Yes
Serial Number: 30F-HN84330
Condition: Used
Stock Number: ADGT
Description: AGCO 800 GRAIN TABLE, THIS UNIT HAS A CRARY AIR REEL. HEAD CART IS NOT INCLUDED, FARMER WANTS TO KEEP THE CART. WILLING TO DISCUSS.
Updated: Monday, July 27, 2026 09:36 AM
Location: Taylorsville, Kentucky, USA
Seller: Wayne's Farm Machinery
Cutting Width: 7.62 m
Cutterbar Type: Flex
Serial Number: 2554926F
Condition: Used
Stock Number: 2299
Gathering Type: Auger
Description:
Updated: Monday, August 10, 2026 02:16 PM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Cutting Width: 6.1 m
Cutterbar Type: Flex
Serial Number: 2081266F
Condition: Used
Gathering Type: Auger
Description: AGCO/Gleaner 800 Grain Platform
-20' working width
-SCH sickle
-Yellow plug or single point
-Hydraulic reel
-Came off of Massey-Ferguson ...
Updated: Tuesday, June 16, 2026 08:58 AM
Location: Camp Point, Illinois, USA
Seller: Bastert Farm Equipment
Serial Number: 3055047F
Condition: Used
Stock Number: W57047
Gathering Type: Auger
Description: Good 30ft head
Older head but well taken care of and regular maintenance
Call for more information
Updated: Tuesday, August 11, 2026 10:09 AM
Location: Pomeroy, Iowa, USA
Seller: Western Iowa Equipment
Number of Rows: 8
Row Spacing: 76.2 cm
Stalk Stompers: Yes
Serial Number: 0830MJ27149
Condition: Used
Chopping Capabillity: Non Chopping
Description: Gleaner 830 Hugger, 8x30, stalk stompers, poly, ear savers
BEFORE DRIVING, PLEASE CALL TO CONFIRM LOCATION AND AVAILABILITY OF EQUIPMENT!!!
Updated: Saturday, August 15, 2026 05:41 PM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Knife
Serial Number: HN27659
Condition: Used
Stock Number: 214930
Description: Model: AGCO / Challenger 830 (Hugger series)-Rows: 8-Row Spacing: 30 in-Working Width: 20 ft-Snoots: Poly-Frame: Rigid-Auger: Cross auger-Deck Plat...
Updated: Wednesday, July 29, 2026 08:40 AM
Location: Marysville, Kansas, USA
Seller: KanEquip, Inc. - Marysville
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 830-HL27165
Condition: Used
Stock Number: W56057
Description: CALL FOR PRICE AND INFO
Updated: Friday, June 19, 2026 10:13 AM
Location: Pomeroy, Iowa, USA
Seller: Western Iowa Equipment
Number of Rows: 6
Row Spacing: 91.44 cm
Rolls: Standard
Serial Number: AGCR636TOAHCH1167
Number of Stalk Stompers: 0
Condition: Used
Description: VERY NICE 3000 SERIES AGCO CORN HEAD 6 ROWS 36" SPACING
Updated: Tuesday, June 30, 2026 03:03 PM
Location: Williamston, North Carolina, USA
Seller: Lilley International - Williamston
Serial Number: HU27247
Condition: Used
Stock Number: H35940
Description: Used AgCo 3000 8RN corn head, dual drive, poly snouts,
fits Gleaner Lat tilt combines
Updated: Thursday, July 30, 2026 05:16 PM
Location: Wausau, Wisconsin
Seller: Swiderski Equip, Inc. - Wausau
Number of Rows: 6
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 630RHP27431
Condition: Used
Stock Number: 14706
Description: Nice 3000 head, poly, 6x30 head, single point, lateral,
Updated: Monday, August 17, 2026 02:06 PM
Location: Charlotte, Michigan, USA
Seller: Williams Farm Machinery, Inc
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 830RHN27563
Condition: Used
Warning Lights Work: Yes
Description: poly electric stripper plates
Updated: Friday, August 14, 2026 11:01 AM
Location: Chesaning, Michigan, USA
Seller: Card Bros. Equipment, Inc.
Number of Rows: 8
Row Spacing: 76.2 cm
Serial Number: HM27139
Condition: Used
Warning Lights Work: Yes
Chopping Capabillity: Non Chopping
Description: 830 poly electric deck plates
Updated: Friday, August 14, 2026 11:01 AM
Location: Chesaning, Michigan, USA
Seller: Card Bros. Equipment, Inc.
Number of Rows: 8
Row Spacing: 76.2 cm
Serial Number: 083025511
Condition: Used
Description: 3000 hugger poly
corn head
8 row 30
2 owner like new snapping roll blades
Good chains
Updated: Thursday, July 16, 2026 10:07 AM
Location: Media, Illinois, USA
Seller: Cole Implement Co.
Serial Number: 2046473F
Condition: Used
Stock Number: H37606
Description: Used AGCO 520-20' Flex Bean Head, off Gleaner R62,
lateral tilt, schumacher sickle.
Updated: Monday, August 10, 2026 03:29 PM
Location: Wausau, Wisconsin
Seller: Swiderski Equip, Inc. - Wausau
Cutting Width: 9.14 m
Serial Number: AGCM52300AHDW1230
Condition: Used
Gathering Type: Draper
Description: AGCO MASSEY FERGUSON 5200 30 Ft Draper Swather Header
• 30 Ft width
• Hydraulic tilt
• UII pickup reel
• Gauge wheels
• Hydraulic fore & af...
Updated: Monday, August 17, 2026 02:11 PM
Location: Waskatenau, Alberta, Canada
Seller: Hammerstrap Industries Inc.